MOUNTING TEMPLATES We produce racks from module 0.5 until module 42, from quality 5 to quality 10. Quality 5 racks with a maximum one-piece length of 1000 mm, quality 6 racks with a maximum one-piece length of 2000 mm and lower quality racks with a maximum one-piece length of 3000 mm. PRODUCTS RANGE INDEX SERIES QUALITY MATERIAL HEAT-TREATMENT HRC SUPERFACE DRILLING MODULES 20H MAGNUM 5 16MnCr5 case hardening 58-62 ground yes 2_3_4_5_6 20 MAGNUM 5 16MnCr5 case hardening 58-62 ground no 2_3_4_5_6 25H 5 16MnCr5 carburized and induction-hardened 60 ground yes 2_3_4_5_6 25 5 16MnCr5 carburized and induction-hardened 60 ground no 2_3_4_5_6 30H 5 C45E induction-hardened teeth 55-58 ground yes 2_3_4_5_6 30 5 C45E induction-hardened teeth 55-58 ground no 2_3_4_5_6 35H 5 SAE1141 induction-hardened teeth 56-60 ground yes 2_3_4_5_6 35H 5 SAE1141 induction-hardened teeth 56-60 ground no 2_3_4_5_6 40H 6 16MnCr5 carburized and induction-hardened 60 ground yes 1_1,5_2_2,5_3_4_5_6 40 6 16MnCr5 carburized and induction-hardened 60 ground no 1_1,5_2_2,5_3_4_5_6 45H 6 C45E induction-hardened teeth 55-58 ground yes 1_1,5_2_2,5_3_4_5_6_8_10_12 45 6 C45E induction-hardened teeth 55-58 ground no 1_1,5_2_2,5_3_4_5_6_8_10_12 50H 6 SAE1141 induction-hardened teeth 56-60 ground yes 1_1,5_2_2,5_3_4_5_6 50 6 SAE1141 induction-hardened teeth 56-60 ground no 1_1,5_2_2,5_3_4_5_6 55H 7 C45E induction-hardened teeth 55-58 ground yes 2_3_4_5_6 55 7 C45E induction-hardened teeth 55-58 ground no 2_3_4_5_6 60H 7 SAE1141 induction-hardened teeth 56-60 ground yes 2_3_4_5_6 60 7 SAE1141 induction-hardened teeth 56-60 ground no 2_3_4_5_6 62H 8 C45E induction-hardened teeth 55-58 ground teeth yes 2_3_4_5_6 62 8 SAE1141 induction-hardened teeth 56-60 ground teeth no 2_3_4_5_6 64H 8 C45E induction-hardened teeth 55-58 ground teeth yes 2_3_4_5_6 64 8 SAE1141 induction-hardened teeth 56-60 ground teeth no 2_3_4_5_6 65H 8 C45E induction-hardened teeth 55-58 just milled yes 2_3_4_5_6 65 8 C45E induction-hardened teeth 55-58 just milled no 2_3_4_5_6 70H 8 SAE1141 induction-hardened teeth 56-60 just milled yes 2_3_4_5_6 70 8 SAE1141 induction-hardened teeth 56-60 just milled no 2_3_4_5_6 75H 8 42CrMo4 not included – just milled yes 2_3_4_5 75 8 42CrMo4 not included – just milled no 2_3_4_5 80H 9 C45E not included – cold drawn yes 1_1,5_2_2,5_3_4_5_6_8_10_12 80 9 C45E not included – cold drawn no 1_1,5_2_2,5_3_4_5_6_8_10_12 85H 9 SAE1141 not included – cold drawn yes 1_1,5_2_2,5_3_3.183_4_5_6 85 9 SAE1141 not included – cold drawn no 1_1,5_2_2,5_3_3.183_4_5_6 90H 10 C45E induction-hardened teeth 55-58 cold drawn yes 1_1,5_2_3_4_5_6_8_10_12 90 10 C45E induction-hardened teeth 55-58 cold drawn no 1_1,5_2_3_4_5_6_8_10_12 95H 10 SAE1141 induction-hardened teeth 56-60 cold drawn yes 1_1,5_2_3_4_5_6 95 10 SAE1141 induction-hardened teeth 56-60 cold drawn no 1_1,5_2_3_4_5_6 Download Name* Email* Phone* State*SubmitReset